Model/Name StarTOC ON-LINE Ultra-Pure Analyzer Notes
Analysis Method Ultra-Pure/Non-Dispersive Infrared (NDIR) CO2 Detection  
Analytes Measured Total Organic Carbon; Total Carbon; Total Inorganic Carbon; Non-Purgeable Organic Carbon; TOC-True (including purgeable Organics)  
Detector Type (CO2) NDIR (solid state; no moving parts; computer-controlled; non-reflective sample cell-impervious to corrosion and guaranteed for 5 years) Footnote 1 - NDIR vs Conductivity
Control/Data Handling Industrial Microsoft Windows CE Computer, Touch Screen, Paperless Chart Recorder    
Sample Introduction Digital Injection  
Measurement Specifications    
Measurement Range (mg/L) 0.100 to 10.0  
Accuracy/Repeatability (%) 3    
Carrier Gas Flow (mL/min.) 300 mL/max - Computer Controlled Mass Flow    Bottled Gas Supply Preferred
  Controller CO2 & HC - FREE AIR, OR O2     
  15 +/- 2 PSI        
Average Analysis/Response Time (minutes) Including TIC 8-12    
Outputs RS-232    
  4-20 mA (2 ea.)    
  Alarm Relays (3)    
       2 Level Alarms    
       1 Malfunction Alarm    
  Loss of Carrier    
  Out of Service Signal (when unit in calibration or validation check)  
Display Flat Panel Color Paperless Chart Recorder    
Data Storage Internal Memory    
Sample Requirements              
Temperature Range 4 - 90C   TOC Systems offers cooler for higher
  40 - 194 F   temperatures
Sample flow rate  20 mL/min   Fast by-pass loop suggested
Inlet pressure  0-5 psi    
Sample Drain gravity/air break    
UTILITIES Required      
Power:   100/200 VAC    
    50/60 HZ.        
    15 Amp Service        
Carrier Gas CO2 & HC - free air or O2 (300 mL/minute-max.);     
  15 +/- 2 PSI        
  Phosphoric Acid    
  Calibration Standards    
  D.I. Water    
  Sodium Persulfate (option)   To Extend Range
Environment Operating Temperature:10 - 50C    
                                            50  - 122F    
    Epoxy Powder Coated cold rolled Steel      
    Stainless Steel (option)      
  Dimensions (HXWXD) 51 X 51 X 38 (cm)    
  20 x 20 x 15 (in)    
  Mounting  Rack or Wall Mount    
  Weight 34 Kg    
  75 Lbs    
Area Classification Option NEMA - 4, IP 65 Enclosure    
Compliance/Certification CE, CSA, ASTM, EPA Methods    
Conformity Complying with all International Standards, such as:    
  DIN-EN 1484, DIN-ENV 12260, DIN 38409-H3,     
  ISO 8245, Standard Method 5310B, Standard     
  Method 5310C, Standard Method 5310D, USEPA    
  415, USEPA 9060, ASTM D5173, EN 13137    
General Features Auto-Calibration,         
    Historical Data/Time and Date Stamped      
    Multi-Stream Analysis      User to specify number of 
    Oxygen Generator (electricity only)   Eliminates Gas Bottles for up
              to 5 analyzers.  Plant Air Not 
              Required. (For indoor/climate 
              controlled environments only)
    TOC Systems also offers custom options.      
(All performance specifications have been verified in a controlled laboratory environment.  Actual field performance may vary with
application measuring range and detection limits depend on the method, injection volume, vessel purity, chemicals and gases
used, and the qualification of the operators.)
Footnote 1              
          Conductivity vs. NDIR Interferences Chart
          Reliability of TOC Results in ULTRAPURE WATER ANALYSIS

Home About Us TOC Computer Systems Contact Us    Video